TM 9-2320-283-34-2
CAB AND BODY.
3-113. DOOR STRIKER ASSEMBLY REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Left and right side door striker
1. Four screws (5).
2. Two screws (11).
3. Pin (9).
4. Shim (8).
assemblies are replaced in same
Left side shown here.
Remove from item (4).
Pull back to gain access
to item (3).
Remove from item (6).
a. Remove from item (6) and
(7).
Hold item (3) to prevent
falling from place.
b. Remove item (6) from item
(1) and remove item (3)
from inside of item (1).
Remove from item (9).
5. All metal parts.
Clean and inspect.
6. New shim (8).
a. Line up opening in item
(8) with item (10).
b. Install on item (9).
way.
Refer to paragraph 3-4
and paragraph 3-5.
Check that item (8)
rotates freely on item
(9).
3-1010