TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 78 of 570
A. DISASSEMBLY
TM 9-2326283-34-2
REAR TANDEM AXLES.
3-70. FORWARD-REAR AXLE CARRIER REPAIR (Continued),
LOCATION/ITEM
ACTION
REMARKS
9. Ring gear and
Remove as an assembly from
Use a suitable chain
drive pinion
item (15).
hoist attached to a
assembly (30), two
steel bar. Insert the
cones (5) and
steel bar through the
(36), and dif-
center of item (30) and
ferential wheel
lift out.
cage assembly (1).
10. Sixteen screws
(39) and locknuts
Remove from item (4).
Secure item (4) in a
suitable holding fix-
(37).
ture to prevent it from
turning while loosening
items (37) and (39).
11. Gear (32).
Remove from item (4).
If item (32) will not
drop off, tap outer
diameter with soft
mallet to loosen.
12. Case halves (3)
and (4).
Center punch for correct
alinement for reassembly.
WARNING
The differential wheel cage assembly
is under spring tension.
Remove the
last screw very slowly to prevent it
from springing apart and causing per-
sonal injury.
13. Eleven screws (2).
Remove from item (3) and
discard items (2).
14. Screw (2).
Slowly loosen and remove
from item (3) and discard
item (2).
Items (3) and (4) will
separate as soon as the
last item (2) is
removed.
3-634
Back to Top
