TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 76 of 570
A. DISASSEMBLY.
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-70. FORWARD-REAR AXLE CARRIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Mount forward-rear axle carrier in a
suitable overhaul stand.
1. Nut (33).
Loosen from item (31), but
do not remove.
NOTE
Rotate overhaul stand so that ring
gear is facing up.
2. Two caps (11) and
carrier (15).
Center punch for correct
This will provide for
location and alinement.
correct alinement during
reassembly.
3. Two adjusters (7)
and (34).
Center punch for correct
alinement and location.
If a new ring gear and
drive pinion assembly
are being installed,
it is not necessary to
center punch items
4. Lockwire (14).
Cut, remove, and discard.
(7) and (34).
5. Two pins (8) and
(27).
Remove from items (11), (9),
Retain items (9) and
and (26).
(26) for reassembly.
Discard item (8) and
6. Four screws (13)
(27).
and washers (12).
Remove from items (11).
7. Two adjusters (7)
and (34).
Remove from item (15).
8. Two cups (6) and
(35).
Remove from item (15).
NOTE
If ring gear and drive pinion are to
be reused, determine backlash before
disassembly.
Use a suitable dial
indicator as
illustrated in step
55c.
3-632
Back to Top
