TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 84 of 570
B. CLEANING
C. ASSEMBLY.
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-70. FORWARD-REAR AXLE CARRIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
29. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
CAUTION
Coat all parts with OE/HDO-30 lubri-
cating oil before assembly.
30. New cone (5).
Press onto item (3) using
suitable bearing installation
tool and hydraulic press.
31. New cone (36).
Press onto item (4) using
suitable bearing installation
tool and hydraulic press.
32. Unit (40).
33. Case half (3).
Place in item (4).
Aline punch marks with item
(4) and push halves together
and secure with one new item
(2).
34. Eleven new screws
(2).
Install in remaining holes of
item (3).
Torque all new
items (2) to 150-180 lb-ft.
CAUTION
Make certain ring gear sits flat on
flanged case.
Any unevenness will
result in incorrect adjustment and
damage to the ring and pinion gear
will result.
35. Gear (32).
Install onto item (4).
36. Sixteen screws
Install in items (32) and
(39) and locknuts
(4), torque to 195-245 lb-ft.
(37).
3-640
Back to Top
