TM 9-2320-285-24-1
HOW TO USE THIS MANUAL (CONT)
4.
Let’s assume you’ve found that the starter is bad.
The replacement procedure is in paragraph 2-25b.
The procedure contains all the information you’ll need to replace the starter.
First check the introductory
material.
It tells you what you’ll need before you start the job.
Below the introductory material is an
assembled view of the vehicle showing the approximate location of the engine, an assembled view of the
engine showing the location of the starter, and an exploded-view illustration which shows you how to take it
out and put it back in.
The text which follows the illustration tells you how to do the job.
5.
If on the other hand, you know what the problem is and its cause, refer to the alphabetical index located at the rear
of this manual and find the name of the part to be replaced and the paragraph number in which maintenance procedures
will be found.
For example, the engine is overheating, on filling the radiator with coolant you see that coolant is pouring out
of a radiator hose indicating that the hose requires replacement.
Referring to the alphabetical index under
the listing "Hoses, Coolant" paragraph 2-15c is referenced.
Turn to this paragraph for radiator hose removal
and installation procedures.
iv