TM 9-2320-285-24-2
4-4.
TRANSMISSION (CONT)
e. Third Clutch, Center Support, and Second Clutch Assemblies (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
10
g.
Support (8)
Install
h.
New capscrew
Install
(5) and
washer (6)
i.
Support (8)
Compress
Attach center support lifter into recess
between seal ring grooves on
support hub, as shown.
Lower
support
(8)
into
transmission
making sure that threaded hole in
support (8) alines with hole for
capscrew (5) in transmission.
Seat
support (8) firmly against internal
snap ring (10).
Remove center
support lifter.
Finger tight only
Install compressor base over hub of
support (8), as shown.
Install
compressor bar and center bolt, as
shown.
Use two capscrews.
Apply
five pounds foot torque to center
bolt
4-68