TM 9-2320-285-24-2
4-4.
TRANSMISSION (CONT)
e. Third Clutch, Center Support, and Second Clutch
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
12
Transmis-
a
Low planetary,
Install
sion
low clutch,
and adapter
housing
assemblies
b
Governor and
Install
rear cover
assembly
c
Center support
Remove
and second
clutch
assemblies
d
First clutch
Install
assembly
e
Main shaft and
Install
gear unit
assembly
Repair first, if necessary.
Para 4-4g
Repair first, if necessary.
Para 4-4k
Turn transmission torque
converter end up.
Refer to
steps d-f, h-j.
Keep center
support and second clutch
assemblies together for
later installation
Repair first, if necessary.
Para 4-4f
Repair first, if necessary.
Para 4-4b Be sure that thrust washer is
retained with oil-soluble grease to rear
of main shaft and gear unit assembly.
Attach gear unit lifter behind splines,
as shown.
Attach hoist to ring on gear
unit lifter and lower into transmission.
Be sure main shaft and gear unit
assembly is fully seated against first
clutch assembly and all gears and
splines are engaged
4-70