TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 107 of 1320

TM 9-2320-304-14&P

2-45

Operating Instructions (Cont)

(8)

Release joystick (10).

(9)

Inspect and verify trailer guides (12) are lined up between flatrack main rails (13).

NOTE

If not alined, do

step (10)

. If alined, go to

step (11)

.

(10)

If not alined:

(a)

Move joystick (10) to LOAD position.

(b)

When flatrack is fully reloaded, release joystick (10).

(c)

Repeat steps

(6)

through

(8)

.

(11)

Move joystick (10) to UNLOAD position until hook arm cylinders (14) have fully extended and

mainframecylinders(15)haveextended6to12in

.(35to30cm)

.

(12)

Release joystick (10).

CAUTION

Engine speed must be at idle before using hydraulic selector switch or damage to equipment

may result.

(13)

Turn hydraulic selector switch (9) to MAN H.A. position.

(14)

Move joystick (10) to LOAD until flatrack rear rollers (11) are centered between trailer stacking

brackets (16).

(15)

Release joystick (10).

(16)

Turn hydraulic selector switch (9) to MAN M.F. position.