TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 121 of 1320

TM 9-2320-304-14&P
2-59
Operating Instructions (Cont)
(16)
Move joystick (10) to LOAD position until front of flatrack is raised approximately 12 to 18 in.
(30to46cm)abovetrailerdeckheight
.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(17)
Turn the hydraulic selector switch (9) to MAN M.F. position.
(18)
Move the joystick (10) to UNLOAD position until flatrack rollers (11) contact trailer stops (15)
and front of flatrack guides are seated on trailer.
(19)
Release the joystick (10).
(20)
Inspect that rear flatrack rollers (11) on flatrack have contacted trailer stops (15).
(21)
Apply the service brake pedal (16).
(22)
Push in truck PARKING BRAKE control (3).


Back to Top