TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 124 of 1320

TM 9-2320-304-14&P
2-62
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
WARNING
Never drive with LHS NO TRANSIT indicator illuminated. An illuminated indicator means
LHS is not fully stowed. The load could break loose causing serious injury or death to
personnel.
NOTE
LHS OVER LOAD indicator will come on when main frame cylinders are fully extended or
fully retracted and joystick is being activated.
(34)
Move the joystick (10) to LOAD position and hold in this position until main frame
cylinders (19) are fully retracted.
CAUTION
Engine speed must be at idle before using hydraulic selector switch or damage to equipment
may result.
(35)
Turn the hydraulic selector switch (9) to MAN H.A. position.
NOTE
LHS OVER LOAD indicator will come on when hook arm cylinders are fully extended or
retracted and joystick is being activated.
(36)
Hold the joystick (10) in LOAD position until the hook arm cylinders (14) are fully retracted.


Back to Top