TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 143 of 1320

TM 9-2320-304-14&P

2-81

Operating Instructions (Cont)

CAUTION

Engine speed must be at idle before using hydraulic selector switch or damage to equipment

may result.

(23)

Turn hydraulic selector switch (7) to OFF position.

(24)

Put PTO ENGAGE switch (5) in OFF position. Make sure indicator light (6) goes off.

2-10.

CONFIGURING FOR OVER-THE-ROAD OPERATIONS.

Before starting an over-the-road operation make sure that the hydraulic selector switch (1) and the PTO EN-

GAGE switch (2) are in OFF position. If AUTO circuits have failed and manual load operations were used, set

hydraulic selector switch (1) to MAN TRANS position.