TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 137 of 1320

TM 9-2320-304-14&P

2-75

Operating Instructions (Cont)

CAUTION

Engine speed must be at idle before using hydraulic selector switch or damage to equipment

may result.

(12)

Turn the hydraulic selector switch (5) to OFF or MAN TRANS position as required.

(13)

Pull out PARKING BRAKE control (10).

(14)

Put PTO ENGAGE switch (3) in OFF position. Make sure indicator light (4) goes off.

NOTE

If load locks do not engage raise flatrack slightly and lower again. Flatrack should seat

fully and engage load locks.

(15)

Inspect that load locks (11) are engaged and flatrack is fully seated on truck.