TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 145 of 1320

TM 9-2320-304-14&P

2-82.1

Operating Instructions (Cont)

(4)

Remove lock pin (6) and pin (7) from long strut (8) and strut bracket (9).

WARNING

Make sure fingers and hands are not between strut front and rear halves. Fingers and

hands could become pinched during assembly, causing injury to personnel.

(5)

Align long strut (8) with short strut (10).

(6)

Rotate slider arm (4) out with handle and disengage flip lock (5) by rotating it down.

(7)

Position long strut (8) into short strut (10), install pin (7), and lock pin (6). Make sure slider (2)

is in straight ahead position.

(8)

Repeat steps (1) through (7) for right side.

Change 1