TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 331 of 1320

TM 9-2320-304-14&P

2-91

Operating Instructions (Cont)

WARNING

Hydraulic fluid is under great pressure. Engines on both trucks must be shut off while

disconnecting hydraulic lines, steps

(4)

through

(8)

. Failure to do so could cause serious

injury or death to personnel.

CAUTION

To prevent hydraulic contamination, keep hydraulic quick disconnects clean or damage to

hydraulic system may result.

NOTE

Quick disconnects are located on the back of the LHS box.

(4)

Disconnect hydraulic lines (2) on both trucks at quick disconnects (3) located on the back of the

LHS control box (1).

(5)

Using first slave hose (4), connect male end of slave hose (4) to female end of supply hose (5) on

operable truck.

(6)

Connect female end of first slave hose (6) to male end of supply quick disconnect (7) located on

back of LHS control box on disabled truck.

(7)

Using second slave hose, connect female end of slave hose (8) to male end of return hose (9) on

operable truck.

(8)

Connect male end of second slave hose (10) to female return quick disconnect (11) located on

back of LHS control box on disabled truck.