TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 336 of 1320

TM 9-2320-304-14&P

2-96

Operating Instructions (Cont)

2-14. EMERGENCY PROCEDURES (CONT).

b. Manual Hydraulic Operation (LHS).

WARNING

Make sure operator, objects, and other personnel are clear of LHS and truck during LHS

operation or serious injury or death could result to personnel.

NOTE

In the event of electrical failure during loading or unloading, manual operation of main

manifold directional control valves will allow LHS operation until electrical failure can be

repaired.

(1)

Pull out PARKING BRAKE control (1) and place transmission range selector (2) in N (Neutral).

(2)

Put PTO ENGAGE switch (3) in ON position. Make sure indicator light (4) comes on.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(3)

Set hydraulic selector switch (5) to MAN H.A. position, MAN M.F. position, or AUTO position.

Change 2