TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 341 of 1320

TM 9-2320-304-14&P

2-101

Operating Instructions (Cont)

NOTE

Operate electrical lowering override buttons by pressing and releasing buttons, which

controls movement of LHS.

(4)

Locate electrical hook arm override button (6) and main frame override button (7).

CAUTION

Before depressing electrical lowering override buttons, direction of LHS payload movement

(load or unload) must be known.

NOTE

•

If flatrack and load center of gravity is over truck, load will return to transport

position. If flatrack and load center of gravity is over rear of truck, flatrack will

lower to the ground.

•

Under certain circumstances, an assist truck may be needed to aid in pulling

payload back if dug in.

(5)

Press main frame override button (7) for unloading. Ground conditions will determine if

flatrack rolls/slides across ground or digs in. In event of digging in, operator should stop

electrical override button operation. If this condition exists, the load will have to be unloaded

manually.