TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 342 of 1320

TM 9-2320-304-14&P

2-102

Operating Instructions (Cont)

2-14. EMERGENCY PROCEDURES (CONT).

(6)

As flatrack unloads, operator continues using main frame electrical override button (7). Weight

of flatrack and payload will continue until load is on ground. Operator will have to exercise

caution during this procedure. If flatrack is not fully on ground, the hook arm override

button (6) may be pressed until flatrack is on ground.

(7)

In event of load returning to transport position on truck during main frame override button (7)

operation, the operation continues until LHS movement stops. The operator then presses the

hook arm override button (6) until the hook arm cylinders are in transport position. Operator

then moves hydraulic selector switch (8) to MAN TRANS position, which allows truck to be

driven. Flatrack and payload must be manually off-loaded. Refer to Para 2--13d.

(8)

Install four screws (2), lockwashers (3), and LHS control box cover (4).