TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 332 of 1320

TM 9-2320-304-14&P

2-92

Operating Instructions (Cont)

2-14. EMERGENCY PROCEDURES (CONT).

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(9)

Start engine on operable truck.

NOTE

Steps

(10)

and

(11)

apply to operable truck only.

(10)

Put PTO ENGAGE switch (12) in ON position. Make sure indicator light (13) comes on.

(11)

Turn hydraulic selector switch (14) to AUTO position.

(12)

If disabled truck has a failure in the hydraulic system, but not the electrical system, go to

step (13)

. If both systems have failed, go to

step (14)

.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(13)

On disabled truck, turn ignition switch (15) to ON and turn hydraulic selector switch (14) to

AUTO position. Operate joystick (16) to return LHS to the stowed position. Go to

step (16)

.