TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 604 of 1320

TM 9-2320-304-14&P

4-184.2

Organizational Maintenance Instructions (Cont)

4-37.1 CONTAINER HANDLING UNIT (CHU) PROXIMITY SWITCH AND SENSING

PLATE REPLACEMENT/ADJUSTMENT (HOOK ARM UP) (CONT).

(2)

Remove two nuts (3) and proximity

switch (4) from proximity switch

mount (5).

(3)

Remove two screws (6), lockwashers (7),

and proximity switch mount (5) from

two clamp halves (8). Discard

lockwashers.

NOTE

Perform step (4) if sensor plate is damaged.

(4)

Remove sensor plate (9) from LHS hook

arm (10).

b. Installation.

(1)

Connect batteries (TM 9-2320-279-20).

NOTE

•

Perform steps (2) through (18) if sensor plate was removed.

•

LHS is being raised to expose area to install sensor plate.

•

LHS will only operate when transmission range selector is in N (Neutral).

(2)

Start engine and stow LHS (TM 9-2320-279-10).

Change 1