TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 605 of 1320

TM 9-2320-304-14&P

4-184.3

Organizational Maintenance Instructions (Cont)

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(3)

Put PTO ENGAGE switch (1) in ON position. Make sure indicator light (2) comes on.

(4)

Set hydraulic selector switch (3) to MAN H.A. position and raise hook arm (4) until hook arm

cylinder pivot pin (5) is 25 in. (63.5 cm) from main frame (6).

(5)

Set hydraulic selector switch (3) to MAN M.F. position and raise main frame (6) until hook arm

cylinder pivot pin (5) is 45 in. (114.3 cm) from main frame (6).

(6)

Shut OFF engine.

(7)

Disconnect batteries (TM 9-2320-279-20).

Change 1