TM-9-2320-304-14-P
LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2000
TM-9-2320-304-14-P - Page 682 of 1320
TM 9-2320-304-14&P
4-234.10
Organizational Maintenance Instructions (Cont)
4-53.2 CONTAINER HANDLING UNIT (CHU) SLIDER/PIVOT ASSEMBLY REPAIR
(CONT).
(7)
Install pivot lock pin (16), pivot lock slot
pin (17), two washers (18), and cotter
pins (19) on pivot lock arm (20).
NOTE
•
Make sure torsion spring is installed
as noted prior to removal.
•
Make sure there is clearance
between pivot lock arm and slider
pivot when tightening hardware.
(8)
Install pivot lock arm (20), torsion
spring (21), screw (22), and locknut (23)
in slider pivot (14).
(9)
Push in on end of torsion spring (21)
and install screw (24) and locknut (25)
in slider pivot (14).
Change 1
Back to Top
