TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 675 of 1320

TM 9-2320-304-14&P

4-234.3

Organizational Maintenance Instructions (Cont)

d. Assembly.

NOTE

•

Perform step below if wire rope or

lock pin was removed.

•

There are two lock pins on container

guide. Left side is shown.

Install wire rope (1), swaging sleeves (2), and lock

pin (3) on container guide (4).

e. Installation.

NOTE

•

If CHU is in flatrack mode, perform

step (1). If CHU is in container

mode, perform step (2).

•

Installation of left-side and

right-side container guides is the

same. Left side is shown.

(1)

Install container guide (1) with pin (2)

and lock pin (3) on stow bracket (4).

(2)

Install container guide (1) on slider (5)

with two lock pins (6).

f. Follow-on Maintenance.

Remove

wheel chocks (TM 9-2320-279-10).

END OF TASK

Change 1