TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 705 of 1320

TM 9-2320-304-14&P
4-234.33
Organizational Maintenance Instructions (Cont)
b. Disassembly.
(1)
Remove grease fitting (1) from end of
long strut (2).
WARNING
Use care when removing snap and
retaining rings. Snap and retaining rings
are under spring tension and can act as
projectiles when released and could cause
severe eye injury.
(2)
Remove retaining ring (3), spacer (4),
and bearing (5) from long strut (2).
(3)
Remove wire rope (6), quick release
pin (7), and pin (8) from cushion clip (9).
NOTE
Perform step (4) if wire rope is damaged.
(4)
Remove two swaging sleeves (10) from
wire rope (6).
NOTE
Performsteps(5)and(6)ifpinendisdamaged
.
Screw is used to secure pin end to long strut.
Note position of pin end prior to removal.
(5)
Remove screw (11) and cushion clip (9) from long strut (2).
(6)
Remove pin end (12) from end of long strut (2).
Change 1


Back to Top