TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

  TM-9-2320-304-14-P - Page 711 of 1320

TM 9-2320-304-14&P
4-234.39
Organizational Maintenance Instructions (Cont)
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Make sure hole in pin end aline with hole for cushion clip.
(9)
Apply sealing compound (Loctite 242) to threads of screw (8).
(10)
Install screw (8) and cushion clip (9) to long strut (2).
(11)
Aline long strut (2) with short strut (5).
(12)
Using handle of arm assembly (6), rotate arm assembly and disengage flip lock (7).
(13)
Position long strut (2) in short strut (5) and install pin (4) and quick release pin (3).
(14)
Repeat steps (3) through (13) as necessary.
(15)
Deleted.
g. Follow-on Maintenance.
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
Change 3


Back to Top