TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 111 of 1318

TM 9-2320-328-13&P-1

0015-1

DRAFT

0015

Change 1

OPERATOR MAINTENANCE

WATER TANK FILL/DRAIN

NOTE

The HEWATT can be filled five different ways;

Main Inlet (Positive Water Source),

Auxiliary Inlets, Direct Tank Fill, Overhead Fill, and Filling from Draft.

MAIN INLET (POSITIVE WATER SOURCE)

1.

Remove cap (1) from driver side main inlet (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Do not use hard suction hose when filling from positive water source.

Hard suction

hose will not hold pressure.

Hose may fail and separate causing injury to personnel

and/or damage to equipment.

2.

Connect 5 in. (13 cm) soft discharge hose to driver side main inlet (2) and positive water source.

HWT 2844

WARNING

ICON 72