TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 115 of 1318

TM 9-2320-328-13&P-1

0015-5

DRAFT

0015

Change 1

AUXILIARY INLETS

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

DRIVER SIDE and PASSENGER SIDE AUX. INLETS operate the same way.

DRIVER

SIDE AUX. INLET shown.

1.

Remove cap (1) from DRIVER SIDE AUX. INLET (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Do not use hard suction hose when filling from positive water source.

Hard suction

hose will not hold pressure.

Hose may fail and separate, causing injury to

personnel and/or damage to equipment.

2.

Connect 3 in. (7.6 cm) soft discharge hose to DRIVER SIDE AUX. INLET (2) and positive water source.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3144

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3145

WARNING

ICON 72