TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 122 of 1318

TM 9-2320-328-13&P-1

0015-12

DRAFT

0015

Change 1

OVERHEAD FILL

1.

Connect soft discharge hose (1) to positive water source.

2.

Unstow right rear access ladder (WP 0012).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

•

Use extreme care when walking on top of vehicle.

Be extra careful in wet, icy, or

muddy conditions.

Failure to comply may result in personnel slipping and falling,

causing injury or death to personnel.

•

Ensure that an assistant has secure grip on water hose prior to opening valve on

positive water source.

Failure to comply may cause damage to equipment or death

or injury to personnel.

3.

Release rubber hook (2) and open WATER FILL cover (3).

4.

Open supply valve on water source and fill water tank.

5.

Close supply valve on water source when water tank is full.

6.

Close WATER FILL cover (3) and connect with rubber hook (2).

7.

Disconnect soft discharge hose (1) from positive water source.

8.

Stow right rear access ladder (WP 0012).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT0380A

WARNING

ICON 21