TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 123 of 1318

TM 9-2320-328-13&P-1

0015-13

DRAFT

0015

Change 1

FILLING FROM DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

When backing up vehicle, one crew member must be in back of vehicle operating

rear step buzzer to communicate with driver.

Failure to comply may result in injury

or death to personnel and/or damage to equipment.

NOTE

•

Pump performance is maximized with less than a 10 ft. (3 m) vertical lift.

As vertical lift

increases above 10 ft. (3 m), maximum pump capacity will be reduced.

Altitude also

affects pump performance.

•

All valves, drains, and caps should be closed.

1.

Position vehicle as close to water source as possible.

2.

Park vehicle (TM 9-2320-422-10).

CAUTION

Ensure suction hose strainer is clean and free from debris and obstructions.

Failure to comply may result in damage to equipment.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove suction hose strainer (1) and hard suction hose (2) from stowage compartments (WP 0040).

NOTE

•

Ensure gaskets are present and free from damage prior to connecting hard suction hoses

and suction hose strainer connections.

•

Ensure all hard suction hose strainer connections are securely tightened.

4.

Connect suction hose strainer (1) to hard suction hose (2).

WARNING

ICON 11

HWT0381