TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 124 of 1318

TM 9-2320-328-13&P-1

0015-14

DRAFT

0015

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove cap (3) from driver side main inlet (4).

6.

Connect hard suction hose (2) to driver side main inlet (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Strainer must be positioned or suspended in water to prevent sucking of debris

(sand, stones, mud, etc.).

Strainer must be deep enough not to cause a whirlpool

on surface of water.

Failure to comply may result in injury or death to personnel

and damage to equipment.

7.

Position suction hose strainer (1) in water source.

8.

Prime water pump (WP 0016).

HWT2845

HWT0381

WARNING

ICON 72