TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 119 of 1318

TM 9-2320-328-13&P-1

0015-9

DRAFT

0015

Change 1

DIRECT TANK FILL

NOTE

Ensure vehicle is on level ground front to back and side to side before operating direct

tank fill auto operation.

Failure to comply may cause water tank to overfill.

1.

Remove cap (1) from direct tank fill inlet (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Install siamese fitting (3) on direct tank fill inlet (2).

3.

Ensure bleeder valve (4) on siamese fitting (3) is in closed position.

4.

Connect either one or two 3 in. (7.6 cm) soft discharge hoses to siamese fitting (3) and positive water source.

5.

Open supply valve on positive water source.

HWT0028

HWT0027