TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 121 of 1318

TM 9-2320-328-13&P-1

0015-11

DRAFT

0015

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

11. Slowly open siamese fitting bleeder valve (4) to relieve pressure.

12. Close siamese fitting bleeder valve (4).

13. Disconnect one or two 3 in. (7.6 cm) soft discharge hoses from siamese fitting (3).

14. Remove siamese fitting (3) from direct tank fill inlet (2) and stow.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

15. Install cap (1) on direct tank fill inlet (2).

END OF TASK

HWT0027

HWT0028