TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 277 of 1318

TM 9-2320-328-13&P-1

0037-1

DRAFT

0037

Change 1

OPERATOR MAINTENANCE

MANUAL PRIMING PUMP OPERATION

MANUAL PRIMING PUMP OPERATION (CAB)

NOTE

Ensure water source is available before performing pump priming function.

1.

Prepare vehicle for required pumping operations.

2.

Start engine (TM 9-2320-422-10).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Turn PUMP PTO switch (1) to on position.

Indicator light (2) will illuminate.

4.

Put HIGH IDLE switch (3) to ON position.

Indicator light (4) will illuminate.

5.

Enable cab pressure governor (5) operation (WP 0017).

HWT1586D

.

.

.

.

.

.

.

.

.

.

CAUTION

Engine must be at idle before engaging PTO.

Failure to comply will result in

damage to PTO and/or transmission.

HWT1517