TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 268 of 1318

TM 9-2320-328-13&P-1

0034-10

DRAFT

0034

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Turrets should never be pointed at personnel.

Failure to comply may result in injury

or death to personnel.

31. Lift bumper turret power switch guard (44) and put POWER switch (45) to

|

(on) position.

Indicator light (46)

will illuminate.

32. Push and release agent discharge button (47) on front of joystick control handle (48) to begin discharge.

33. Put WINDSHIELD DELUGE switch (49) to on position, and discharge water for 15 to 30 seconds.

34. Put WINDSHIELD DELUGE switch (49) to off position.

35. Push battery disconnect to off position (WP 0007).

NOTE

All valves should be left open for 24 hours, to allow for evaporation of water from system.

36. Pull battery disconnect to on position (WP 0007).

37. Push and release agent discharge button (47) on front of joystick control handle (48) to stop discharge.

38. Put POWER switch (45) to



(off) position.

Indicator light (46) will go out.

HWT1368A

WARNING

ICON 72