TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 263 of 1318

TM 9-2320-328-13&P-1

0034-5

DRAFT

0034

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Once mission is complete, ensure onboard water tank is empty.

Stopping and

starting pumping operations may allow water to freeze, causing damage to

equipment.

If water tank is not emptied, exposed components may freeze, causing

damage to equipment.

9.

Pump out or discharge water until water tank is empty.

NOTE

•

Go to Step (10) if foam system operations were required.

•

Go to Step (11) if foam system operations were not required.

10. Put PUMP COOLER switch (5) to off position.

Indicator light (6) will go out.

11. Push TANK FILL & RE-CIRCULATING LINE valve control CLOSE button (7) until red indicator light (8)

illuminates.

12. Put HIGH IDLE switch (9) to OFF position.

Indicator light (10) will go out.

13. Put PUMP PTO switch (11) to off position.

Indicator light (12) will go out.

14. Put TANK TO PUMP switch (1) to CLOSE position.

Indicator light (2) will go out.

HWT1430A