TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 255 of 1318

TM 9-2320-328-13&P-1

0033-17

DRAFT

0033

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

82. Remove cap (62) from DIRECT TANK FILL inlet port (63).

83. Put DIRECT TANK FILL switch (64) to OPEN position.

Indicator light (65) will illuminate.

84. Allow tank and plumbing to drain completely.

85. Put DIRECT TANK FILL switch (64) to OFF position.

Indicator light (65) will go out.

86. Install cap (62) on DIRECT TANK FILL inlet port (63).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

87. Remove cap (2) from driver side main inlet (3).

88. Allow water to drain from driver side main inlet (3).

89. Install cap (2) on driver side main inlet (3).

90. Turn on vehicle windshield wipers (TM 9-2320-422-10).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3206

HWT1601A