TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 278 of 1318

TM 9-2320-328-13&P-1

0037-2

DRAFT

0037

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

If discharge gauge reading does not increase, or priming pump does not discharge

water to ground in 60 seconds, do not continue running priming pump.

Stop water

pump, or damage to equipment may result.

6.

Pull MANUAL PRIMER handle (6) to open position.

7.

Push and hold PUMP PRIME switch (7) to on position.

8.

Ensure pressure governor (5) displays water pressure on pump discharge display.

9.

If pressure governor (5) displays water pressure, release PUMP PRIME switch (7) to off position.

10. Push MANUAL PRIMER handle (6) to closed position.

11. Set pressure governor (5) to operating pressure (WP 0017).

12. Proceed with mission.

END OF TASK

HWT1586C