TM-9-2320-328-13-P-1
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3
MARCH 2009
TM-9-2320-328-13-P-1 - Page 360 of 1318
TM 9-2320-328-13&P-1
0055-2
DRAFT
0055
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT2766
WARNING
ICON 72
Vehicle engine must be turned off and all water pressure relieved from system
before performing the following procedures.
Failure to comply may cause injury to
personnel.
Step 1.
Check if discharge nozzles are free from dirt, debris, and obstructions.
a.
If discharge nozzles are not free from dirt, debris, and obstructions,
clean obstructions from faulty discharge nozzle.
b.
If discharge nozzles are free from dirt, debris, obstructions, notify
Supervisor.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
