TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 489 of 1318

TM 9-2320-328-13&P-1
0063-13
DRAFT
0063
HWT0671A
Step 14.
Remove skid plate grille (WP 0349).
Disconnect main wire harness main 2 connector.
With a test lead set, check for continuity across main wire harness wire 2837 (gray)
from main wire harness main 2 connector, terminal H to main wire harness pump house
wire harness connector, terminal 7.
a.
If there is continuity, repair wire 2837 in cab instrument panel wire
harness if repairable (TM 9-2320-325-14&P), or replace cab instrument
panel wire harness (WP 0271).
b.
If there is no continuity, repair wire 2837 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top