TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1130 of 1390

TM 9-2320-328-13&P-2

0293-2

DRAFT

0293

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Disconnect No.1 driver side flow sensor wire harness connector (3) from No. 1 driver side flow sensor line

connector (4).

3.

Remove No. 1 driver side flow sensor wire harness (5) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Route No. 1 driver side flow sensor wire harness as noted.

•

Install split loom, cushion clips, and cable ties as noted prior to removal.

1.

Install No. 1 driver side flow sensor wire harness (5) on vehicle.

2.

Connect No. 1 driver side flow sensor wire harness connector (3) to No. 1 driver side flow sensor line

connector (4).

HWT2832