TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1133 of 1390

TM 9-2320-328-13&P-2

0294-1

DRAFT

0294

FIELD LEVEL MAINTENANCE

NO. 1 DRIVER SIDE PRESSURE TRANSDUCER WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note routing of No. 1 driver side pressure transducer wire harness prior to removal to

ensure proper installation.

•

No. 1 driver side pressure transducer wire harness is routed from pump house to pump

operator’s panel assembly.

•

Note position and remove split loom, cushion clips, and cable ties as required.

•

Tag and mark connectors prior to removal to ensure proper installation.

1.

Disconnect No. 1 driver side pressure transducer wire harness connector (1) from No. 1 driver side pressure

transducer valve control connector (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1943

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

WP 0391, Fig. 34

Equipment Conditions

Pump operator’s panel opened (WP 0207)

Pump house panel G removed (WP 0339)