TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1316 of 1390

TM 9-2320-328-13&P-2

0319-2

DRAFT

0319

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove two elbows (3) and (4) from valve (8).

5.

Remove fitting (9) from valve (8).

6.

Remove nipple (10) and pipe (11) from valve (8).

7.

Remove nipple (10) from pipe (11).

8.

Remove fitting (6) from fitting (9).

END OF TASK

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Install cable ties as required.

1.

Apply sealing compound to threads of two fittings (6) and (9), elbows (3) and (4), and nipple (10).

2.

Install fitting (6) on fitting (9).

3.

Install fitting (9) on valve (8).

4.

Install nipple (10) on fitting (11).

5.

Install nipple (10) and pipe (11) on valve (8).

6.

Install two elbows (4) and (3) on valve (8).

HWT1907

WARNING

ICON 30, 44, 27