TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1308 of 1390

TM 9-2320-328-13&P-2

0316-2

DRAFT

0316

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (3) and (4) if nozzle cup bracket needs to be removed.

3.

Remove four nuts (5), lockwashers (6), eight washers (7), four screws (8), and nozzle cup bracket (9) from

pump house frame (10) and vehicle.

Discard lockwashers.

4.

Remove nut (11), lockwasher (12), washer (13), screw (14), and nozzle cup (15) from nozzle cup bracket (9).

Discard lockwasher.

END OF TASK

INSTALLATION

NOTE

Perform Steps (1) and (2) if nozzle cup bracket was removed.

1.

Install nozzle cup (15) on nozzle cup bracket (9) with screw (14), washer (13), lockwasher (12), and nut (11).

2.

Install nozzle cup bracket (9) on pump house frame (10) with four screws (8), eight washers (7), four

lockwashers (6), and nuts (5).

HWT2364A