TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 294 of 1390

TM 9-2320-328-13&P-2

0130-2

DRAFT

0130

INSPECTION AND SERVICE UPON RECEIPT

a.

Upon receipt of new, used, or reconditioned vehicle, inspect all fill valves, drain valves, and dump valves to be

sure they are in proper working order.

Secure, clean, and correctly adjust and/or lubricate as

needed (WP 0129).

Check Components of End Item (COEI) and Basic Issue Items (BII) to be sure every item

is there, in good condition, and properly mounted or stowed (WP 0040).

b.

Check vehicle for proper tire pressure.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Tire pressure must be checked properly or serious injury or death to personnel may

occur.

Refer to Table 1 for proper tire pressure check instructions.

c.

Perform Preventive Maintenance Checks and Services (PMCS) for the HEWATT (WP 0129).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 65

Table 1.

Tire Pressures.

Tire Location

Tire Pressures

Highway

Cross Country-Dry

Cross Country-Wet

Sandy Terrain

Front Tire

60 psi

(414 kPa)

35 psi

(241 kPa)

20 psi

(138 kPa)

30 psi

(207 kPa)

Front Sand Tire

60 psi

(414 kPa)

N/A

N/A

25 psi

(172 kPa)

Rear Tire

70 psi

(483 kPa)

40 psi

(276 kPa)

30 psi

(207 kPa)

35 psi

(241 kPa)

Rear Sand Tire

70 psi

(483 kPa)

N/A

N/A

30 psi

(207 kPa)