TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 569 of 1390

TM 9-2320-328-13&P-2

0183-3

DRAFT

0183

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- .

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

2.

Apply sealing compound to threads of cap (10), weldment (9), and foam service valve (6).

3.

Install plug (11) on cap (10) (WP 0318).

4.

Install cap (10) on strainer (5) (WP 0318).

NOTE

Install weldment in same position as noted prior to removal.

5.

Install weldment (9) on strainer (5) (WP 0318).

6.

Install foam service valve (6), strainer (5) and U-bolt (4) on bracket (7) with two locknuts (3).

7.

Install two couplings (1) and (2) on vehicle (WP 0313).

END OF TASK

HWT1480

WARNING

ICON 30, 44, 27