TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 863 of 1390

TM 9-2320-328-13&P-2

0246-1

DRAFT

0246

Change 1

FIELD LEVEL MAINTENANCE

DOOR SWITCH REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

All door switches are removed the same way.

Driver side rear compartment door shown.

1.

Disconnect passenger side body wire harness connector (1) from door switch (2).

2.

Remove door switch (2) and washer (3) from door switch bracket (4).

3.

Remove washer (3) from door switch (2).

END OF TASK

INSTALLATION

NOTE

All door switches are installed the same way.

Driver side rear compartment door shown.

1.

Install washer (3) on door switch (2).

2.

Install door switch (2) on door switch bracket (4) with washer (3).

3.

Connect passenger side body wire harness connector (1) on door switch (2).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3368

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

References

WP 0391, Fig. 61

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)