TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 862 of 1390

TM 9-2320-328-13&P-2

0245-2

DRAFT

0245

Change 1

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

CAUTION

Use sealing compound sparingly only on pipe threads.

Do not apply compound to

hose connections.

Damage to equipment may result.

NOTE

Both discharge pressure transducers are installed the same way.

Passenger side shown.

1.

Apply sealing compound on threads of pressure transducer (3).

2.

Install pressure transducer (3) on fitting (4).

3.

Connect pressure transducer connector (1) on pressure transducer wire harness connector (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install pump house panel G (WP 0339)

2.

Calibrate pump operator’s panel electric valve controller (WP 0210)

END OF TASK

END OF WORK PACKAGE

HWT0087

WARNING

ICON 30, 44, 27