TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 853 of 1390

TM 9-2320-328-13&P-2
0241-3
DRAFT
0241
INSTALLATION
1.
Install positive block terminal (10) on pump house control box (19) with two locknuts (21) and screws (20).
2.
Install negative block terminal (6) on pump house control box (19) with two locknuts (18) and screws (17).
3.
Install wire (16) on positive block terminal (10) with lockwasher (15) and nut (14).
4.
Install wire (13) on negative block terminal (6) with lockwasher (12) and nut (11).
5.
Install five wires 1138 (9) on positive block terminal (10) with lockwasher (8) and nut (7).
6.
Install wire 1640 (5) on negative block terminal (6) with lockwasher (4) and nut (3).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7.
Close pump house control box cover (2) and tighten two screws (1).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
HWT2806


Back to Top