TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 844 of 1390

TM 9-2320-328-13&P-2
0239-4
DRAFT
0239
INSTALLATION
NOTE
Perform Steps (1) and (2) if 120-volt receptacle box was removed.
1.
Install 120-volt receptacle box (6) on pump house panel O (21) with two screws (20), washers (19),
lockwashers (18), and nuts (17).
2.
Install shoreline inlet receptacle wire harness (16) on 120-volt receptacle box (6) with rubber grommet (15),
compression ring (14), and strain relief (13).
HWT1772
HWT1771


Back to Top