TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 835 of 1390

TM 9-2320-328-13&P-2

0238-1

DRAFT

0238

FIELD LEVEL MAINTENANCE

BATTERY BOX AND BRACKET REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Battery box weighs approximately 50 lb. (25 kg).

Do not attempt to lift or move

battery box without the aid of an assistant.

Failure to comply may result in the

injury to personnel and/or damage to equipment.

1.

With the aid of an assistant, remove six locknuts (1), screws (2), and battery box (3) from front battery box

bracket (4) and rear battery box bracket (5).

Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1821

WARNING

ICON 7

Tools and Special Tools

Standard Automotive Tool Set (SATS),

(WP 0398, Item 15)

• Wrench, Torque, Click, Ratcheting, 1/2” Drive

250 ft-lb, Regular, 1-1/8”

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Locknut (6)

Locknut (3)

Locknut (3)

Locknut (3)

Locknut (5)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0139

WP 0391, Fig. 48

Equipment Conditions

Batteries removed (TM 9-2320-325-14&P)

Air tanks 1 and 3

removed (TM 9-2320-325-14&P)