TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 831 of 1390

TM 9-2320-328-13&P-2

0237.1-3

DRAFT

0237.1

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove four screws (13), lockwashers (14), washers (15), and 24-volt 15 amp per bank battery charger (16)

from bracket (17).

Discard lockwashers.

5.

Remove four nuts (18), lockwashers (19), eight washers (20), four screws (21), and bracket (17) from

bracket (22).

Discard lockwasher.

END OF TASK

INSTALLATION

NOTE

Bracket (17) must be installed on bracket (22) when installing 15 amp per bank battery

charger.

1.

Install bracket (17) on bracket (22) with four screws (21), eight washers (20), four lockwashers (19), and

nuts (18).

2.

Install 24-volt 15 amp per bank battery charger (16) on bracket (17) with four washers (15), lockwashers (14),

and screws (13).

HWT3454